1、适用范围:五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印
2、特性:耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸 碱 、耐汽油、耐腐蚀。
3、技术参数:
a.粘度:8000-12000cps;
b.细度:5um↓、光泽:60°↑;
c.干燥条件:自干24小时;
d.铅笔硬度:2h↑;
e.耐酒精:99%乙醇500g力来回超过30次;
f.耐磨:500g力来回超过30次;
g.过网性能:77t-145t网纱;
4、稀释剂 的选择:稀释剂 :s-3;使用前添加10%-15%的db-01固化剂 效果更好。
5、注意事项:
a.不可与其它油墨混用;
b.使用s-3慢干稀释剂 稀释;
c.加过固化剂 的油墨必须在3小时内用完;
d.密封保存,远离火源。
6、应急处理措施:
备注:由于材料及使用中的变数,可能是结果会有变化,以上数据仅供参考,使用前请自行测试。
1, the scope of application: no halogen ink can be printed, abs, pc, ps, acrylic, metal, electroplating, uv surface.
2, characteristics: medium【敏感词】dry, ethanol, acid resistance.
3, technical parameters:
a. viscosity: 8000-12000cps;
b.: 5um:: gloss, fineness of 60 degrees up;
c. dry conditions: 24 hours from dry;
d. pencil hardness: 2h up;
e. resistance to alcohol: 99% ethanol 500g force back【敏感词】forth more than 30 times;
f. wear: 500g force back【敏感词】forth more than 30 times;
g. n e t performance: 77t-145t;
4, thinner choice: thinner: s-3; before using the 10%-15% to add db-01 curing agent better effect.
5, matters needing attention:
a.【敏感词】other printing ink;
b. using s-3 slow dry diluent dilution;
c. plus the curing agent of the ink must be used up within 3 hours;
d. sealed to save, away from the fire source.
6, emergency treatment measures:
a. such as dipped into the eye immediately clear water cleaning, serious medical treatment,
b. fire fighting measures: dry powder, foam fire extinguisher【敏感词】sand.
] note: due to the materials【敏感词】the use of variables, possibly is the change, the above data are for reference only, before using please self testing.