smooth moving pointer bargraph
built in sca
autoranging w/ range hold
user programmable
log【敏感词】linear bargraph
rate, scaler【敏感词】integrate modes
digital calibration
user defined keys, units, & ranges
deadtime correction
|
|
the “cypher” is an advanced survey instrument. it is very user friendly【敏感词】uses digital technology to greatly enhance its operation. it works with most gm, proportional,【敏感词】scintillator probes【敏感词】displays the information on a backlit alphanumeric lcd. the display has a moving pointer bargraph that closely approximates a meter movement. it is smooth, easy to read【敏感词】accurate. the digital level【敏感词】the bargraph scale are also shown on the display.
the instrument has many different modes including rate, integrate,【敏感词】scaler. each mode is independently programmable【敏感词】may be turned off. it can be【敏感词】up as a simple ratemeter with only one mode【敏感词】it can be【敏感词】up for all 6 modes. thus it can be easily adjusted to suit your application. if that application changes it is easy to reconfigure for a new one. this instrument helps you get the readings you want. it is difficult to misread the data with the units【敏感词】range information shown right on the display.
the 4 soft-key buttons on the front panel operate the instrument. the two on the right are user defined. one user may want to use them for light【敏感词】beeper while another may want to use them for range hold【敏感词】reset. the soft-keys also help to simplify the operation of the instrument. there is only one level of display; you are never lost in a maze of menus.
the digital nature of the instrument means that setup, calibration【敏感词】maintenance are greatly simplified. many of the operational【敏感词】calibration functions can be controlled【敏感词】set from either the front panel【敏感词】the inside panel【敏感词】both. the accuracy of the data is assured by a crystal controlled timebase【敏感词】the switchable deadtime correction extends the linear range of most probes.
the “cypher” survey instrument is small, rugged,【敏感词】light. it is simple to operate, loaded with features【敏感词】programmable for either simple【敏感词】advanced uses. it is the perfect all around instrument.
specifications
mechanical
size overall: 7.5 in. (19 cm) l x 4.2 in. (10.7 cm) w x 4.45 in. (11.3 cm) h w/o probe holder. gasketed splashproof aluminum enclosure. top panel is milled【敏感词】anodized with nonerasable nomenclature. bottom painted. lcd window is acrylic.
weight: 2.25 lb. (1 kg) with batteries.
external controls: 4 pushbuttons (power, mode, *, and ). power button when held down for 5 seconds resets the microprocessor.
internal controls: 1 pushbutton for entry into calibrate mode.
internal construction: circuit board hinges for easy access. batteries are mounted on an aluminum panel in nylon holders. ics are socketed. all components are standard types.
probe clip: for 1" dia handle. others sizes available.
electrical
detectors: accepts gm, proportional【敏感词】scintillation probes.
display: 2 line x 16 character alphanumeric supertwist lcd with backlight. backlight may be timed【敏感词】on/off. contrast adjustable from front panel.
audio: built in piezo beeper at 2.4 khz. selectable to beep at every 1, 8, 64【敏感词】2048 counts. may be switched to off, soft【敏感词】loud.
single channel analyzer: may be switched in【敏感词】out. threshold, window & gain digitally【敏感词】from front panel, internally【敏感词】both. gain has three settings, threshold【敏感词】window 200 settings.
high voltage: adjustable from 300 to 2000 volts for gm【敏感词】proportional detectors. 300 to 1600 volts for scintillators with 100 meg voltage divider. actual measured hv can be displayed on the screen. hv monitored for proper operation.
batteries: 6 aa cells for 100 hour life. battery condition displayed at turn on【敏感词】turn off. low battery warning during operation. instrument will automatically turn off when batteries are too low for proper operation. may be【敏感词】for auto turn off.
calibration【敏感词】parameter storage: data stored in permanent memory for minimum of 40 years. batteries not required for storage.
operational
modes: 6 modes available, not all need be used; rate, integrate, cpm【敏感词】cps, scaler,【敏感词】2 user defined to any mode with separate calibration. calibration, setup,【敏感词】maintenance mode also available.
units: rem, rad, r, sv, bq, dis, cts, cpm, cps. time base: /s, /m, /h prefix: p,n,u,m,k,m,g,t【敏感词】none. user defined units available.
user defined keys: *, and are user defined soft keys for each mode. power【敏感词】mode buttons are also used as soft keys for some functions.
menu selection: simple to operate. single level menus. mode button will access all normal modes quickly【敏感词】easily.
rate mode: shows numeric value of rate with user selected units【敏感词】timebase. updated every second. prefix automatically selected but may be preprogrammed. limited to 3 significant digits. autoranging w/range hold. bargraph also displayed if desired.
cpm/cps mode: same as rate mode except units are cpm【敏感词】cps. may also be programmed as cnts/m【敏感词】cnts/s.
integrate mode: shows integrated dose【敏感词】counts in user configured units. also shows integration time.
scaler mode: shows counts up to 6 digits. count time variable from 1 sec to 999 min. beeper from counts【敏感词】timeout.
softkey * and key: user defined for rate, integrate,【敏感词】cpm/cps modes. choices include: light, beeper, hold, reset, tc,【敏感词】range hold.
bargraph: moving digital pointer on background of scale markings. updated 10 times every second. full scale of 2.5, 5【敏感词】10【敏感词】log are user selectable. bargraph width is 2.2 in (5.6 cm). markings for each scale are user changeable from inside the instrument. full scale markings are actively shown on the display in the proper units & prefix but may be turned off.
additional setup options: display exchange 1st【敏感词】2nd lines, time to range up, time to range down, min range, max range, decimal point-prefix change limit. auto turn-off time.
response
range: 0.1 to 1,000,000 cpm with multiplier.
accuracy: within 1%【敏感词】2 digits for count rates from 1 to 1,000,000 cpm. timebase is crystal controlled. radiation accuracy is dependent on probe.
time constant: dynamically【敏感词】depending on count rate but has settings of short, med【敏感词】long.
dead time correction: corrects up to 10 times actual rate. may be independently【敏感词】on【敏感词】off for each mode.
environmental
temperature range: -15°c to 50°c
temperature dependence: hv ±2%, rate ±1%, over temp range.
humidity range: 0 to 95% non condensing
options
input connector: bnc standard. mhv, c,【敏感词】shv also available.
options: probes, cable【敏感词】probe holder. repair manual.
equipment: supplied w/ manual, batteries, scales, probe holder
specifications subject to change without notice
|