德国iba公司digi-13型cr和dr性能检测模体
北京华睿志达科技发展有限公司、北京华瑞森科技发展有限公司销售的:德国iba公司 digi-13型cr和dr性能检测模体用于cr和dr成像系统的质量检测(包括 均匀性、空间分辨力、低对比分辨率、可见光野和x射线野的校准和伪影等)。
digi-13型cr和dr性能检测模体产品简介:
根据din 6868-13标准, 用于cr和dr成像系统的质量检测(包括 均匀性、空间分辨力、低对比分辨率、可见光野和x射线野的校准和伪影等)
在1毫米厚的铜质基板 (300 x 300 x 1.0 mm) 上有:
1.动态步进式楔形梯, 含有不同的射线吸收系 数的7 阶步进式楔形梯: 0.00, 0.30, 0.65, 1.00,1.40, .85和2.3 mm 铜厚度动态范围
2.低对比度测试体, 由铝质圆盘组成, 直径10毫米, 在70kv时产生的对比度范围为: 0.8%, 1.2%,2.0%, 2.8% , 4.0% 和5.6%
3.分辨率检测 (线对卡): 检测空间分辨率0.6 –5.0 lp/mm, 45°旋转设计
4.标记区为信号标准化和均匀性检测
5.不同尺寸的暗盒边缘区域标记
患者等效衰减模体
患者等效衰减模体,由 25 毫米纯铝材料制作,用于模拟患者腹部体厚条件,配合常规x线摄影、 cr/dr 摄影检测模体的联合使用。
construction of the test device digi-13
basic copper plate (300 x 300 x 1.0 mm) with
dynamic step wedge, made of copper
➀, with different radiation absorption, 7 steps ascending: 0.00, 0.30, 0.65. 1.00, 1.40, 1.85***2.3 mm cu, for controlling the dynamic range low contrast objects, made of aluminium disks
➁, with a diameter of 10 mm, producing a contrast of 0.8 %, 1.2 %, 2.0 %, 2.8 % , 4.0 %***5.6 % at 70 kv, for determination of contrast resolution resolution test (lead foil)
➂, 0.6 – 5.0 lp/mm, 45° rotated, for checking spatial resolution marked areas for signal standarization***homogenity check
➃alignment marks for different cassette sizes
北京华睿志达科技发展有限公司
beijing huaruizhida technology development co.ltd.,
北京华瑞森科技发展有限公司
beijing huaruison technology development co.ltd.,
地址:北京通州区通州工业开发区光华路16号方和正圆大厦a座2楼